This mini gas engine is with water cooled structure, it is an IC engine, because when it rotate, it can cooled by water, it is known as water cooled engine. Retro design, ideal for gift collection.

This mini engine is made of brass and stainless steel, looks adorable.

There are two ways to start this mini engine: 1), external force (electric drill) . 2), manual starting.

95# gasoline

It can be used as an intuitive view of how the engine works, as a desktop model to play with, and a great personal gift for model enthusiasts

Item Name: Retro Gas Engine

Material: Brass + Stainless Steel + Wood

Powered By: The ignition is powered by 1.5V power supply.

Carburetor : Adjustable

Displacement: 2.6CC

Cylinder Diameter: 13mm

Stroke: 12mm

Wooden Base: 150 x 120 x 30mm

Engine: 104 x 94 x 78mm

Product Size: 15 x 12 x 10.8cm

Product Weight: 1400g

Package Dimensions: 20 x 20 x 15cm

Package Weight: 1500g

Packing: Box

1.Check the wiring of the engine from the wooden base, connect the fuel tank pipeline, and install AA battery(1. 5v).

2.Fill the tank with 95 # gasoline. After the filling is completed, turn the flywheel clockwise on the right side of the engine (power switch surface) for many turns. No air can be generated.

3.Turn on the power switch and quickly rotate the flywheel clockwise on the right side of the engine(power switch surface)to start the engine.

1.If the ignition device is normal and the cylinder compression is normal if the machine cannot start normally, it is very likely that the carburetor oil needle needs to be adjusted.

2.After tightening the main oil needle on the carburetor, loosen 1/4 turn and start the flywheel, so that the mixing ratio of gasoline and air can reach the normal working mixing ratio.

3. When the machine stops, the power switch should be turned off.

1x Mini Retro Gas Engine

2x Engine Spare Parts Start Device